Support

support-page-main-image
return to support

How to clean the transducer

*Put the humidifier into standby mode/OFF. Unplug the humidifier from outlet

Weekly cleaning procedure

Remove the water tank from the humidifier base. Remove the air diverter from the reservoir. Empty any water from the reservoir. Apply a vinegar soultion (50/50 mix of white vinegar and water) or detergent (small amount) to the surface of the transducer and allow it to soak for 2-5 minutes. After 2-5 minutes, wash out the solution. Wipe away any debris with a clean soft cloth or brush. Place the water tank back onto the humidifier base.

* Do not use abrasive products, alcohol, solvents or similar products that may cause permanent damage to surfaces. Examples of suitable cleaning materials are descalers, foam soaps without an antibacterial agent and vinegar.
Need More Help?
contact us